The retail price shown in a store can be different from the price shown for the same product in the Fulfillment Center (FC) Admin. This is because DecoNetwork applies the store’s commission and markup settings after calculating the product price. Understanding the order of these calculations makes it easier to check a price that looks incorrect.
In This Article
- Prerequisites
- Why these pricing settings matter
- Understand how the store price is calculated
- Review commission and markup settings
- Calculate the price of a decorated or blank T-shirt
- Understand what happens when settings change
- Check the product price in Admin
- Best Practices
- Troubleshooting
- FAQs
- Additional Resources
Prerequisites
- Administrator access is required to review product pricing and change Store Commission settings in the FC Admin.
- Store markup settings can be changed in the FC Admin or by the affiliate store owner.
Why these pricing settings matter
The FC sets a product's recommended retail price (RRP). Each store's commission and markup settings are then used to calculate its Store Retail Price, which may be higher or lower than the RRP. Understanding these settings helps the FC and affiliate store owners explain price differences and make informed pricing decisions.
Understand how the store price is calculated
The FC first sets the price of a product. For a catalog product using catalog product markup (Supplier Product Markup), the blank product RRP is the catalog product cost (Supplier Base Cost) plus the catalog product markup.
If the product is decorated, the decoration price is added. This FC-set price is shown as Customer Retail Price. It is the RRP that is used as the starting point for the store commission calculation.
The store’s final selling price, called Store Retail Price, is then calculated in two further steps:
-
DecoNetwork deducts Store Commission from Customer Retail Price (RRP) to calculate Store Wholesale Price.
-
It adds Store Markup to Store Wholesale Price to calculate Store Retail Price, which is the product price the customer sees in that store before any separately applied order charges, such as tax or shipping.
Store Wholesale Price is the amount retained by the FC from the product sale under this pricing model.
Store Markup is the amount added above the wholesale price and is the affiliate’s product-sale earnings before any applicable adjustments or fees. Store Markup can be set as either a fixed amount or a percentage of Store Wholesale Price.
Note: Store Commission is calculated as a percentage of the Customer Retail Price, while percentage-based Store Markup is calculated on Store Wholesale Price.
Review commission and markup settings
The FC sets the Standard commission rate under Admin > Websites > Commission Settings > Standard Commission Rates. This rate applies to affiliate stores by default.
To set a different rate for an individual store, go to Admin > Websites > Manage [store] > Administration > Store Commission Settings and select Override Default Commission Rate. This store-specific rate takes precedence over the standard rate, so later changes to the standard rate do not affect that store.
Store Markup can be configured through the store's Price Settings:
- FC administrator: Go to Admin > Websites > Manage [store] > Price Settings.
- Affiliate store owner: Go to Admin > Price Settings.
Under Default wholesale-to-retail markup, select Default markup as percentage of wholesale or Default markup as fixed amount.
When an affiliate store is created, DecoNetwork calculates the default percentage markup based on the commission rate so that Store Retail Price equals the FC's Customer Retail Price. For example, with a 10% commission, the initial markup is approximately 11.11%, not 10%, because commission is calculated from Customer Retail Price, while markup is calculated from Store Wholesale Price.
Calculate the price of a decorated or blank T-shirt
Consider a T-shirt with a supplier base cost of $7.95, a supplier product markup of 65%, and a direct-to-garment (DTG) decoration charge of $10.00. The following table shows how these amounts, together with Store Commission and Store Markup, determine the final Store Retail Price.
| Price component | Calculation | Amount ($) |
|---|---|---|
| Supplier Base Cost | From supplier catalog | 7.95 |
| Supplier Product Markup (Tiered, 65%) | 7.95 x 65%, rounded | 5.17 |
| Blank Product Price | 7.95 + 5.17 | 13.12 |
| Decoration Price (DTG) | Configured DTG charge | 10.00 |
| Customer Retail Price (RRP) | 13.12 + 10.00 | 23.12 |
| Store Commission (25%) | 23.12 x 25% | 5.78 |
| Store Wholesale Price | 23.12 – 5.78 | 17.34 |
| Store Markup (10%) | 17.34 x 10% | 1.73 |
| Store Retail Price | 17.34 + 1.73 | 19.07 |
The initial Customer Retail Price is $23.12, but the customer sees $19.07 in this store because the 25% commission reduces the wholesale price and the store adds back only 10% of that wholesale price.
For an undecorated product, the same pricing calculation applies without the decoration charge. Using the T-shirt from the previous example, the supplier base cost is $7.95 and the 65% supplier markup adds $5.17, giving a Customer Retail Price of $13.12 for the blank product. With a 20% Store Commission, Store Wholesale Price becomes $10.50. If Store Markup is 0%, the customer pays $10.50.
Understand what happens when settings change
Changing Store Markup changes Store Retail Price without affecting the store's commission rate. For percentage-based markup, the change in selling price is calculated from Store Wholesale Price. For example, increasing markup from 0% to 10% increases Store Retail Price by 10% of Store Wholesale Price.
Changing Store Commission affects Store Wholesale Price. When a store has a percentage-based markup greater than 0%, DecoNetwork automatically adjusts the markup to maintain the previous Store Retail Price. This adjustment does not apply to a 0% percentage markup or a fixed-amount markup. After changing Store Commission, you can manually adjust Store Markup to set a different selling price.
For example, consider the decorated T-shirt with a 10% Store Commission and a 10% Store Markup. If the commission increases to 20%, DecoNetwork automatically adjusts the markup to 23.75% to maintain the previous Store Retail Price of $22.89.
| Before | After | |
|---|---|---|
| Store Commission | 10% | 20% |
| Store Wholesale Price | $20.81 | $18.50 |
| Store Markup | 10% | 23.75% |
| Store Retail Price | $22.89 | $22.89 |
The adjusted markup preserves the previous Store Retail Price of $22.89 rather than restoring the FC's Customer Retail Price of $23.12.
Warning: When you enter and save a value in either the percentage-based or fixed-amount markup field, DecoNetwork automatically fills the other field with the same number. The number is copied, not converted.
For example, if you save a 10% markup, the fixed-amount field is filled with $10, which is not 10% of the Store Wholesale Price.
This behavior also applies when a store is created. Check both markup fields and the resulting Store Retail Price to make sure the pricing is correct.
Check the product price in Admin
To check how a product’s Store Retail Price is calculated:
- In Admin, go to Products > [specific product] > Pricing.
- Locate the Price Breakdown.
- Click Show Store Pricing under Customer Retail Price.
- Click Select Store and choose the store you want to review.
View commission, wholesale price, markup, and retail price for the selected store.
The breakdown shows the Store Commission deducted from Customer Retail Price to calculate Store Wholesale Price, followed by the Store Markup added to determine Store Retail Price.
If the final price differs from what you expected, check the selected store’s commission rate and markup settings.
Best Practices
- After changing commission or markup settings, check the resulting Store Retail Price in the product's Price Breakdown.
- When comparing prices, select the correct store and use the same product, size, color, and decoration options.
- When you switch between percentage-based and fixed-amount markup, check the resulting selling price. See the warning in Understand what happens when settings change.
Troubleshooting
Problem: The price in the storefront differs from Customer Retail Price in Admin.
Cause: The selected store's commission and markup settings change the final Store Retail Price.
Solution: Open the product's Pricing page, select Show Store Pricing, choose the store, and compare Store Commission, Store Wholesale Price, Store Markup, and Store Retail Price.
Problem: Changing commission unexpectedly increases the selling price.
Cause: If maintaining the previous Store Retail Price would require a negative markup, DecoNetwork sets the percentage markup to 0%. As a result, Store Retail Price equals the new Store Wholesale Price, which is higher than the previous selling price.
Solution: Check the new Store Wholesale Price and Store Markup in the Price Breakdown. If a different selling price is needed, adjust Store Markup in the store's pricing settings.
FAQs
Does Store Commission represent the affiliate's actual earnings?
Store Commission is the amount offered to the affiliate through the commission setting, but it does not necessarily equal the affiliate's actual earnings. The affiliate's product-sale earnings are calculated as Store Retail Price minus Store Wholesale Price, which equals Store Markup. At the initial default markup, this amount equals Store Commission. If the markup changes, the affiliate's earnings change accordingly. Applicable discounts and fees may also affect the final amount.
What happens to fixed-amount markup when Store Commission changes?
Fixed-amount Store Markup remains unchanged when Store Commission changes. As a result, Store Retail Price may change. See Understand what happens when settings change for more details.
Additional Resources
Still have questions? In your DecoNetwork Admin, use the Universal Search box in the top bar to find more related help guides. Need more help? Click the icon next to the search box to open the help menu and submit a support ticket. Our Client Services team is ready to assist!
Comments
0 comments
Please sign in to leave a comment.