Pricing tables allow you to define how customers are charged for decoration services using more sophisticated methods than a flat fee. Price tables set the pricing on a per-order line basis - like-products of varying sizes will be on the same order line, provided they are in the same color. Different colors will always be a new order line. Each decoration process has its own unique set of pricing variables which are outlined below. Creating a price table does not activate its use for the decoration method, the price table (you may define many) must be selected as the active price table for each decoration process.
This article covers price tables for the following decoration processes: direct-to-garment (DTG), sublimation (SUB), transfer (TRF), rhinestone (RHS), direct-to-film (DTF), and ultraviolet (UV) printing.
In This Article
- Prerequisites
- Why use printing price tables?
- How price tables are applied
- Step 1: Open the Price Tables page
- Step 2: Edit an existing price table (if applicable)
- Step 3: Add a new price table
- Step 4: Select a pricing method
- Step 5: Configure the price table
- Step 6: Apply discounts to additional areas (optional)
- Step 7: Save the price table
- Best Practices
- Troubleshooting
- FAQs
- Additional Resources
Prerequisites
- You must have administrator access to use this feature.
Why use printing price tables?
Printing price tables allow you to configure decoration pricing based on factors such as order quantity, decoration area size, color type, and the number of areas used. This provides more flexibility than a flat fee and allows pricing to vary according to the selected decoration process and pricing method.
How price tables are applied
Price tables set the default price for products to which that default applies. For example, DTG price tables will set pricing for all products that use DTG, or for a group/category of products that use DTG as configured in the Product Group. As always, default pricing may also be overridden at the product level by editing a product's pricing tab.
Product Groups add a layer of configuration between global settings that affect all products and product-level settings that only affect a single product. Product Groups affect all products that are set to use the group.
Price Tables are activated in Admin > Decoration Processes > Decoration Pricing by setting the decoration process to Price Table, and then in the Price Table drop-down box, select the price table you wish to use.
Step 1: Open the Price Tables page
Navigate to Admin > Decoration Processes > DTG Printing (or other process) > Price Tables.
The Price Tables page for DTG Printing.
The Price Tables page will be displayed. If you already have price tables configured, they will be listed here. The Type column will describe the type of pricing that the price table uses.
Step 2: Edit an existing price table (if applicable)
If you want to edit an existing price table, click on the Edit button beside the price table you want to edit and proceed to Step 5.
Step 3: Add a new price table
If you are configuring price tables for the first time, click Add Price Table.
Step 4: Select a pricing method
Select a pricing method you want to use, then click Save to load the price table for configuration.
Available pricing methods when adding a price table.
- Standard Pricing - Flat prices based on number of areas used: select this option if you want pricing to be a single fixed price based on the number of decoration areas used.
- Area Pricing - Flat prices based on area size breakdowns: select this option if you want pricing to be a fixed price per definable sized bracket.
- Area Pricing - Prices per square inch based on area size breakdowns: select this option if you want pricing to be area-based, changeable per definable size bracket.
- Area Pricing - Prices per square inch based on number of areas used: select this option if you want pricing to be area-based, scalable with volume, based on the number of decoration areas used.
Step 5: Configure the price table
Configure the price table according to the pricing method selected.
Standard Pricing - Flat prices based on number of areas used
Standard pricing will not take any factors into consideration when determining the price of using the decoration method, other than the number of decoration areas being used.
Standard Pricing table in Single price mode.
- Give the table a Name.
- Rows sets how many decoration areas will have a price set.
- Columns sets how many product order volume levels will be configured.
-
Pricing Mode lets you choose how you want to price the decorations:
-
By color type changes the price of the decoration based on the color used (white, light, or dark).
Standard Pricing table in By color type mode.
- Single price will not vary the price based on the color or colors used in a decoration area.
-
- Quantity From sets the volume pricing levels (adjust the number of levels in the Columns box).
- Complete the pricing table by setting the value of the decoration at each volume, color (if used), and decoration area number. The prices set in each Area # will be added together. For example, if 2 print areas are used, area 2 will be added to area 1 in the final determination of price. The system does not differentiate between areas used when calculating the price in a pricing table, it will only count the number of areas used and apply the price set in the pricing table.
- The per-print price for additional print areas used will charge the rate set for every extra decoration area used.
Area Pricing - Flat prices based on area size breakdowns
Use this price table to set pricing that is based on the accumulated size of decorations, with the pricing set into definable brackets (e.g. 0-20 square centimeters (sq cm)/square inches, >20-30 sq cm/square inches, etc).
Area Pricing with flat prices based on size breakdowns.
This pricing method is configured as per Standard Pricing, with the following differences:
- Square centimeter/inch pricing brackets are set as rows.
- Area Calculation is determined by either the size of the graphic or the bounding box of the graphic.
Area Pricing - Prices per square inch based on area size breakdowns
Use this price table to set pricing that is based on the accumulated size of decorations, with the pricing set into definable brackets (e.g. 0-20 sq cm/inches, >20-30 sq cm/inches, etc).
Area Pricing with per-square-inch prices based on size breakdowns.
Area Pricing - Prices per square inch based on number of areas used
Use this method to set a price per sq cm/inch per decoration area used, scalable with volume, with price per decoration area changeable for each subsequent placement area used.
Area Pricing with prices based on the number of areas used.
This method is configured as per Standard Pricing, with the following differences:
- Pricing is per sq cm/inch, per decoration used. Thus the first area used will use the #1 per sq cm/inch price, the second area used has the #2 price, and so on.
When using pricing per sq cm/inch, the order in which decoration areas are added can affect the total decoration price because different unit rates may apply to Area #1, Area #2 and subsequent areas. Check that the resulting prices meet your expectations and apply decoration areas consistently.
- The area calculation can be set by either the Actual graphic size or bounding box size as set in the Area Calculation drop-down.
- Minimum $ sets the lowest possible price for using a decoration area.
Step 6: Apply discounts to additional areas (optional)
Choose whether to apply discounts to additional areas.
-
Tick the Apply discounts on additional areas? checkbox if you want to set discounts for using additional printing areas. This option enables percentage discounts on areas decorated beyond the first.
Option to apply discounts to additional printing areas.
-
Specify the number of additional areas you want to apply discounts for.
Additional area discount settings enabled.
- Specify the percentage discount for each area.
Step 7: Save the price table
When complete, click Save.
Best Practices
- Select the pricing method that matches how you want to charge for decoration areas, sizes, and order quantities.
- Check the prices configured for each quantity level and decoration area before saving the price table.
- Make sure the intended price table is selected as the active price table for the decoration process.
Troubleshooting
The price table is not being used
Possible cause: The price table has been created but has not been selected as the active price table for the decoration process.
Solution: Go to Admin > Decoration Processes > Decoration Pricing. Set the decoration process to Price Table and select the intended table from the Price Table drop-down.
The price does not match the default price table
Possible cause: Default pricing may have been overridden at the Product Group or individual product level.
Solution: Review the relevant Product Group configuration and the product's pricing tab.
The total price changes depending on the order of decoration areas
Possible cause: Per-square-unit pricing based on the number of areas used can apply different rates to Area #1, Area #2, and subsequent areas.
Solution: Review the configured rates for each area and apply decoration areas consistently.
FAQs
Does creating a price table automatically activate it?
No. You must select the price table as the active table for the decoration process under Admin > Decoration Processes > Decoration Pricing.
Can I configure more than one price table?
Yes. You can define multiple price tables and select the one you want to use for each decoration process.
Can price tables be overridden for individual products?
Yes. Default pricing may be overridden by editing the individual product's pricing tab.
How does Standard Pricing calculate the decoration price?
Standard Pricing uses the number of decoration areas and the configured quantity levels. The prices assigned to the applicable decoration areas are added together.
Can I apply discounts to additional decoration areas?
Yes. Select Apply discounts on additional areas? and configure the number of additional areas and percentage discounts for each area.
Additional Resources
Still have questions? In your DecoNetwork Admin, use the Universal Search box in the top bar to find more related help guides. Need more help? Click the icon next to the search box to open the help menu and submit a support ticket. Our Client Services team is ready to assist!
Comments
0 comments
Please sign in to leave a comment.